Tannus

Installed on my ebike (26" rear) for daily Vancouver city commuting. The puncture-proof confidence is unbeatable for potholes, glass, and urban debris.
​The Good:
Perfect for e-bike abuse - rear wheel takes constant torque (750W motor), and these hold up like solid tires without the harsh ride

Fills slightly harder than regular tires, but that's the trade-off for zero maintenance. Still comfortable without the rear suspension.

Installation Reality Check (Critical Advice):
HIGHLY recommend buying the P-Tool (https://tannus.com/products/p-tool-pinza-montaggio-copertoni-airless?pr_prod_strat=pinned&pr_rec_id=9d30d58ee&pr_rec_pid=8930268545361&pr_ref_pid=8932553195857&pr_seq=uniform) as the included plastic tool will make you work hard.. brutally hard without it.
Key hack: DON'T push pins where instructions show! The rim lip blocks from below, making it impossible (you'll just get tired and frustrated). Instead, push slightly offset so the pin bends and snaps into the channel see my illustration below or better buy the damn P-tool!
​
I did it solo (skipped gym that day, lol), but worth every sweat drop. Tannus team: update instructions with this trick!

Waiting for 26" x 3" version - would be perfect for ebikes like mine. Fingers crossed!

Bottom line: Game-changer for any hard working e-bike. Buy it, get the P-Tool, install smart. 100% recommend

Satisfied by the service. Thank you.

I’ve just installed them on my gravel bike. I have Zipp 101 XPLR rims and Michelin Power Gravel 47-622 tires. I didn’t need to cut them, they fit perfectly. I used a 26" inner tube on the front wheel and a Schwalbe tube on the rear, which is compatible with 27.5", 28" and 29".
I haven’t had much time to test them yet, only a few days of commuting rides, but so far everything seems fine. I was worried that rolling resistance would increase, but I don’t feel like I’m riding slower or with more effort.
So far I can mention only one downside: the way the product is packaged. Because they are folded, when you take them out of the box they are deformed. I recommend inserting an inner tube inside, inflating it, and leaving it for a while so it can return to its original shape. Otherwise, it can stay twisted under the tire and create bumps or deformations. A possible solution would be to insert cardboard or another material inside during packaging (where the inner tube normally sits) to prevent deformation.
For now, the product has convinced me, and I plan to buy two more pieces for my MTB.

Easy & no mess!

Very good but not same felling as inflatable tires

Good

Good good good!!!!!!

Good good gopd !!!!!!!!!!!

it's the bees knees, really.
Come back from a long holiday,
no need to check your tires for going to work the next morning.
No repeated mounting and unmounting wheels, finding the puncture etc.
Only o̲n̲c̲e̲ fit your Tannus, and you're through with it all, for good !

I had a big piece of glass (from a bottle?) in my rear tire, and Tannus Armour did it's job. That incident alone is worth the money for an Armour. It saved me from a long walk home, time and the job of fixing a puncture.
I was out riding my Gavia Race Big fat bike, with 26x4.80" Schwalbe Al Mighty without studs rear tire (where my Armour is) and 26x4.80" CST Roly Poly front tire (without Armour).
In the photo is the piece of glass compared with a standard size box of matches.

Very good cuatomer support

Fff bunii

the best thing since sliced bread.
For the small diametre (20") mounting is a challenge,
but once it's finished you're done with it for good.
No hassle with your tire - for ever!

The best thing since sliced bread.
For the small diametre mounting is a challenge,
but once it's done you're finished for good;
no hassle anymore with your tire - for ever!

Amazing 🤩,high quality 😇express shipment 📦🤣😇👍👍👍